In this video I redesign the DIY table saw lift mechanism to stabilize it. I mount some bracings and cross beams and then mount the new hgr15 linear rails and […]
Category: Woodwork
44 posts
I start of the table saw build by showing and explaining how I want the lift mechanism to work. This is a work in progress and in constant evolution, so […]
I start of the “CNC Made” series by designing and making multiple clamp racks to organize my clamps. In this video I design the rack in Fusion 360, make the […]
Finishing up the Router Table build. Making some laser carved markings on the router table top to be able to align the fence. I also make two end stops to […]
Making the fence with 3d-printed adjustable knobs and dust extraction! 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 STEP file (.step): Router Table v1.0 Measurements for the router table: Router […]
In this part I make the adapter plate for the dust extraction, install the router on the insert plate from Kreg and make the START / STOP switch for the […]
Fitting the Kreg Insert Plate into the table top and mounting the t-tracks for the mitre sleds, feather boards and end stops. 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
How I built the base cabinet for the DIY router table. The plan was to make it 800mm in width and 600mm deep (31.5×23.6 inches). I thought the 600mm depth […]
Making and installing both the Hard wood inserts and the Dowels on the Workbench. They are made out of some African Hard Wood Floor planks I had in my wood […]
In this part of the series I combine the two tops of the workbench with the base. After the glue up I have to build a router JIG to flatten […]
This is how I built the base of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k […]