In this video I redesign the DIY table saw lift mechanism to stabilize it. I mount some bracings and cross beams and then mount the new hgr15 linear rails and […]
Category: Design
46 posts
DIY Ceramics 3D Printer Electronics build part 5. Reusing the old laptop computer to make an electronics cabinet (box) for the Clay 3d-printer 😀This is done to make a reused […]
Before I can start wiring the machine I have to make a way for all the cables to go. Therefore I’m using cable chains on all the axis of the […]
I start of the table saw build by showing and explaining how I want the lift mechanism to work. This is a work in progress and in constant evolution, so […]
In this part of my “CNC Made” series I make and design a custom Chisel Rack for all my chisels. The rack is made to fit the chisels I have […]
Finally finish building the mechanics of the Clay 3d-printer!! This project has been draging out in time due to planing, waiting for parts and other projects, but I am determined […]
Finishing up the Router Table build. Making some laser carved markings on the router table top to be able to align the fence. I also make two end stops to […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
Making and installing both the Hard wood inserts and the Dowels on the Workbench. They are made out of some African Hard Wood Floor planks I had in my wood […]
In this part of the series I combine the two tops of the workbench with the base. After the glue up I have to build a router JIG to flatten […]
This is how I built the base of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k […]
How I built the benchtop pieces that is going to make up the top of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY […]