Making an enclosure for my DIY CNC out of reclaimed materials. I do this to dust and soundproof the machine. At the end of the video I do sound measurements […]
Category: My First DIY CNC
30 posts
This is not the best way of aligning a router but since I had no gauges to use this was the best way I could do it at this time. […]
I have thought about a dust shoe for my CNC machine for a long time and FINALLY I get around to make one. In this video I go thru different […]
My old stepper motor mounting brackets are just two angle iron mounts I found when making the machine. They have worked great but they have been wobbly and unstable. So […]
This is a “spin-off” video from part 18 of my DIY CNC machine build: https://youtu.be/H81EVpKbUwo RIDICULOUSLY long video on how to measure and design a new gantry in Fusion 360 […]
Design in Fusion 360 and toolpath video: https://youtu.be/dp2yY-t5h1M I’m finally finished upgrading my DIY CNC gantry! I mounted new supported rails on the z-axis and a new Makita RT0700C spindle. […]
I want to try cutting some letters made in Fusion 360 out of MDF material on my DIY CNC machine. Here I try a new milling approach where I use […]
I try different feedrates and pass depths in MDF material with my cheap chinese spindle (400W). This is just to test my DIY CNC machine and to show […]
THANK YOU!!! I just reached 2000 subscribers and I’m very great full. To honor you people I made this plaque and tried to explain how I did it along […]
In part 16 of this build you saw me making mounts for the Makita spindle. The plan is to improve the whole z-axis assembly when I change the spindle […]
Download 3D files of the COINFIDGET I know the fidget spinner craze is over and that they are “soooo” 2016, hehe But, anyway, this was a project for me […]