In this video I redesign the DIY table saw lift mechanism to stabilize it. I mount some bracings and cross beams and then mount the new hgr15 linear rails and […]
Category: Building
Before I can start wiring the machine I have to make a way for all the cables to go. Therefore I’m using cable chains on all the axis of the […]
I build the first lift mechanism design and figure out what works and what does not work 🙂 DIY Table Saw build series: #1: https://youtu.be/fef8vz4DaEM #2: https://youtu.be/rlSCO2XgK7Y #3: TBA #? […]
I start of the table saw build by showing and explaining how I want the lift mechanism to work. This is a work in progress and in constant evolution, so […]
Making some retractable casters out of metal scraps to free up some floor space in the workshop! SOME OF MY OTHER PROJECTS:Router Table build series: https://www.youtube.com/playlist?list=PLbU4V5X-fLzus8qNvmdxx9rr1Ajz7xEMs Table Saw Build Series: […]
Finishing up the Router Table build. Making some laser carved markings on the router table top to be able to align the fence. I also make two end stops to […]
Making the fence with 3d-printed adjustable knobs and dust extraction! 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 STEP file (.step): Router Table v1.0 Measurements for the router table: Router […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
Making and installing both the Hard wood inserts and the Dowels on the Workbench. They are made out of some African Hard Wood Floor planks I had in my wood […]
In this part of the series I combine the two tops of the workbench with the base. After the glue up I have to build a router JIG to flatten […]
This is how I built the base of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k […]
How I built the benchtop pieces that is going to make up the top of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY […]