In this part I make the adapter plate for the dust extraction, install the router on the insert plate from Kreg and make the START / STOP switch for the […]
Fitting the Kreg Insert Plate into the table top and mounting the t-tracks for the mitre sleds, feather boards and end stops. 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
How I built the base cabinet for the DIY router table. The plan was to make it 800mm in width and 600mm deep (31.5×23.6 inches). I thought the 600mm depth […]
Making and installing both the Hard wood inserts and the Dowels on the Workbench. They are made out of some African Hard Wood Floor planks I had in my wood […]
In this part of the series I combine the two tops of the workbench with the base. After the glue up I have to build a router JIG to flatten […]
This is how I built the base of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k […]
How I built the benchtop pieces that is going to make up the top of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY […]
Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k Part 3 – Building the Base: https://youtu.be/HXoG9TS6cq0 How to make a model of a […]
Unpacking, assembling and testing the Tormek SVS-50 Multi Jig on my Tormek T-4 Water Cooled sharpening System Machine. I try the jig and grind a scew chisel, a roughing gouge […]
Unpacking, mounting and trying out the SVX-150 Scissors Jig for the Tormek water cooled sharpening system. Check out the Jigs website: https://www.tormek.com/uk/en/grinding-jigs/svx-150-scissors-jig/ P.S: Remember that I’m a newbee at sharpening […]
Unpacking and Assembly of the Tormek T-4 Water Cooled Sharpening System. This is the base model and I give it a grinding / sharpening test 🙂 Tormek Website: http://www.tormek.com Community:Website: https://goo.gl/9wZcs1Instagram: https://goo.gl/1TnxKWFacebook: https://goo.gl/H7L72EPatreon: https://goo.gl/5pm5qsTwitter: https://goo.gl/fzWWcA