Finishing up the Router Table build. Making some laser carved markings on the router table top to be able to align the fence. I also make two end stops to […]
Category: Router Table
6 posts
Making the fence with 3d-printed adjustable knobs and dust extraction! 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 STEP file (.step): Router Table v1.0 Measurements for the router table: Router […]
In this part I make the adapter plate for the dust extraction, install the router on the insert plate from Kreg and make the START / STOP switch for the […]
Fitting the Kreg Insert Plate into the table top and mounting the t-tracks for the mitre sleds, feather boards and end stops. 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
How I built the base cabinet for the DIY router table. The plan was to make it 800mm in width and 600mm deep (31.5×23.6 inches). I thought the 600mm depth […]