In this part I make the adapter plate for the dust extraction, install the router on the insert plate from Kreg and make the START / STOP switch for the […]
Fitting the Kreg Insert Plate into the table top and mounting the t-tracks for the mitre sleds, feather boards and end stops. 3d-model files:Fusion 360 file (.f3d): Router Table v1.0 […]
I got hold of some cheap 380mm (15 inch) drawer slides that I decided to use in the router table. I made the drawers themself out of some scrap plywood […]
How I built the base cabinet for the DIY router table. The plan was to make it 800mm in width and 600mm deep (31.5×23.6 inches). I thought the 600mm depth […]
Making and installing both the Hard wood inserts and the Dowels on the Workbench. They are made out of some African Hard Wood Floor planks I had in my wood […]
How I built the benchtop pieces that is going to make up the top of the Roubo Style Split Top Workbench! Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY […]
Part 1 – The design in Fusion 360: https://youtu.be/ZeIhaDjmeAY Part 2 – Building the Benchtops: https://youtu.be/l508wJVPZ8k Part 3 – Building the Base: https://youtu.be/HXoG9TS6cq0 How to make a model of a […]
Turning a small bowl from some African hard wood flooring I sourced from an old table in a previous video: https://youtu.be/l2hdXIHgqlY I use the Record Power Coronet Herald lathe to […]
I got the hold of this old table from the Norwegian Craigslist. It was made by a maker many, many years ago out of some sort African hard wood floor […]
Building a simple tool holder for the Record Power Coronet Herald wood lathe workbench Music: https://www.epidemicsound.com/ Community:Website: https://goo.gl/9wZcs1Instagram: https://goo.gl/1TnxKWFacebook: https://goo.gl/H7L72EPatreon: https://goo.gl/5pm5qsTwitter: https://goo.gl/fzWWcA
#WillysGarageNorway #WoodLathe #Workbench Building a workbench from scratch for the Record Power Coronet Herald Wood Lathe Here are the dimensions of the workbench, let me know if you have any […]